Please select the type of SERVICE, for more information

Push Mower Service

£75.00

plus parts plus vat

Average £100 - £120

Machines can be dropped in any day Monday - Saturday 8.30 am - 5pm no booking required or we can collect.

WHAT IS INCLUDED

  • Check machine starts and all controls work.

  • Clean complete machine and remove all grass and debris.

  • Check out the fuel system, remove the fuel bowl, clean, and inspect fuel lines & fuel tank.

  • Check air filter, clean out, or replace if required.

  • Empty engine oil, and refill with the correct grade of oil, check running to correct RPM

  • Check the ignition system, including the recoil unit, replace the spark plug.

  • Clean, sharpen & balance rotary blade. Additional cost if the blade needs replacement

  • Check, clean, and lubricate the wheels, including rear drive wheels as required.

  • Inspect height adjusters, and lubricate.

  • Visually inspect all belts and pulleys, adjust as required.

  • Check grass flap operation. NOTE. grass bags are not serviced unless a repair is needed

  • Oil/grease control cables and inspect the operation, adjust as required.

  • Grease/oil handle catches and control levers.

  • Apply a Protective spray to the complete machine.

  • Test run of the machine, including a safety check.

Powerdrive Mower Service

£85.00 

plus parts, plus vat

Average £110 - £130

Machines can be dropped in any day Monday - Saturday 8.30 am - 5 pm no booking required or we can collect.

WHAT IS INCLUDED

  • Check machine starts and all controls work.

  • Clean complete machine and remove all grass and debris.

  • Check out the fuel system, remove the fuel bowl, clean, and inspect fuel lines & fuel tank.

  • Check air filter, clean out, or replace if required.

  • Empty engine oil, and refill with the correct grade of oil, check running to correct RPM

  • Check the ignition system, including the recoil unit, replace the spark plug.

  • Clean, sharpen & balance rotary blade. Additional cost if the blade needs replacement

  • Check, clean, and lubricate the wheels, including rear drive wheels as required.

  • Remove covers and inspect gearbox, lubricate chains and make adjustments to controls

  • Inspect height adjusters, and lubricate.

  • Visually inspect all belts and pulleys, adjust as required.

  • Check grass flap operation. NOTE. grass bags are not serviced unless a repair is needed

  • Oil/grease control cables and inspect the operation, adjust as required.

  • Grease/oil handle catches and control levers.

  • Apply a Protective spray to the complete machine.

  • Test run of the machine, including a safety check.

2 Stroke Small Machine Service

£55.00

plus parts plus vat

Average £75 - £85

Machines can be dropped in any day Monday - Saturday 8.30 am - 5pm no booking required or we can collect. (Machines charged at collection rate of Mower)

WHAT IS INCLUDED

  • Check machine starts and all controls work.

  • Clean the complete machine and remove all debris.

  • Check fuel caps, and oil caps if fitted

  • Check out the fuel system, remove fuel, inspect fuel lines, filters & fuel tank.

  • Check air filter, clean out, or replace if required.

  • Check the ignition system, including the recoil unit, replace the spark plug.

  • Check engine performance, including RPM check, and adjust as required.

  • Grease all points with the correct grade and top up as required

  • Check exhaust  port, clean out if required

  • Check clutch springs, bearings, and drum

  • Check safety controls and test

  • Dress chainsaw bars. (chainsaws)

  • Refill strimmer line (strimmers/Brushcutters)

  • Check blower housing and blade (blowers)

  • Apply a Protective spray to the complete machine.

  • Test run of the machine, including a safety check.

 
 
 

Mini Rider Service upto 28" 70cm

£175.00

plus parts plus vat

Average £240 inc

Machines can be dropped in any day Monday - Saturday 8.30 am - 5pm no booking required or we can collect.

WHAT IS INCLUDED

  • Check machine starts and all controls work.

  • Clean complete machine and remove all grass and debris.

  • Check out the fuel system, including checking the float bowl, replace the fuel filter.

  • Check air filter, and pre-filter, clean out or replace if required.

  • Empty engine oil, replace the oil filter, and refill with the correct grade of oil, check running to correct RPM

  • Check the ignition system, including the starter motor, replace the spark plug(s).

  • Check battery and charge. check the charging output, Replace the battery if needed

  • Clean, sharpen & balance rotary blade(s). Additional cost if the blade(s) need replacement

  • Check tyre pressures, and adjust lubricate bearings, if needed

  • Check hand brake and foot brake controls as required.

  • Inspect deck height adjusters, and lubricate/grease points as required

  • Visually inspect all belts and pulleys, adjust as required.

  • Check all bearings for any signs of wear or play.

  • Check steering system for excessive wear, grease where required

  • Check and clean the grass chute.

  • Oil/grease control cables and inspect the operation, adjust as required.

  • Apply a Protective spray to the complete machine.

  • Test run of the machine, including a safety check of all switches.

Ride on Mower upto 30" 76cm

£190.00 

plus parts, plus vat

Average £260 inc

Machines can be dropped in any day Monday - Saturday 8.30 am - 5 pm no booking required or we can collect.

WHAT IS INCLUDED

  • Check machine starts and all controls work.

  • Clean complete machine and remove all grass and debris.

  • Check out the fuel system, including checking the float bowl, replace the fuel filter.

  • Check air filter, and pre-filter, clean out or replace if required.

  • Empty engine oil, replace the oil filter, and refill with the correct grade of oil, check running to correct RPM

  • Check the ignition system, including the starter motor, replace the spark plug(s).

  • Check battery and charge. check the charging output, Replace the battery if needed

  • Clean, sharpen & balance rotary blade(s). Additional cost if the blade(s) need replacement

  • Check tyre pressures, and adjust lubricate bearings, if needed

  • Check hand brake and foot brake controls as required.

  • Inspect deck height adjusters, and lubricate/grease points as required

  • Visually inspect all belts and pulleys, adjust as required.

  • Check all bearings for any signs of wear or play.

  • Check steering system for excessive wear, grease where required

  • Check and clean the grass chute.

  • Oil/grease control cables and inspect the operation, adjust as required.

  • Apply a Protective spray to the complete machine.

  • Test run of the machine, including a safety check of all switches.

Ride on Mower upto 48" 120cm

£210.00

plus parts plus vat

Average £280 inc

Machines can be dropped in any day Monday - Saturday 8.30 am - 5pm no booking required or we can collect.

WHAT IS INCLUDED

  • Check machine starts and all controls work.

  • Clean complete machine and remove all grass and debris.

  • Check out the fuel system, including checking the float bowl, replace the fuel filter.

  • Check air filter, and pre-filter, clean out or replace if required.

  • Empty engine oil, replace the oil filter, and refill with the correct grade of oil, check running to correct RPM

  • Check the ignition system, including the starter motor, replace the spark plug(s).

  • Check battery and charge. check the charging output, Replace the battery if needed

  • Clean, sharpen & balance rotary blade(s). Additional cost if the blade(s) need replacement

  • Check tyre pressures, and adjust lubricate bearings, if needed

  • Check hand brake and foot brake controls as required.

  • Inspect deck height adjusters, and lubricate/grease points as required

  • Visually inspect all belts and pulleys, adjust as required.

  • Check all bearings for any signs of wear or play.

  • Check steering system for excessive wear, grease where required

  • Check and clean the grass chute.

  • Oil/grease control cables and inspect the operation, adjust as required.

  • Apply a Protective spray to the complete machine.

  • Test run of the machine, including a safety check of all switches.