Stihl MS 271 (14", 16" OR 18")
The STIHL MS 271 petrol chainsaw is the perfect tool for harvesting firewood and landscaping use.
The STIHL MS 271 petrol chainsaw is the perfect tool for harvesting firewood and landscaping use. This new version for 2020 is features a newly designed Light 04 guide bar as well as the new .325” RM3 Pro saw chain for improved cutting performance. The high performance .325” saw chain provides up to 20% more cutting performance compared to its predecessor due to the narrower kerf.
Economical 2-MIX engine, long-life air filter system, tool-free filler caps for safe and easy refuelling, fast service access thanks to one-piece engine cover.
Technical data Value Displacement cm³ 50.2 Power output kW/bhp 2.6/3.5 Weight kg 1) 5.6 Power-to-weight ratio kg/kW 2.2 CO2 g/kWh 826 Sound pressure level dB(A) 2) 103 Sound power level dB(A) 2) 115 Vibration values left/right m/s² 3) 4.5/4.5 Tank volume l 0.50 Speed at maximum power Um 9.500 Bumper spike Steel claw Sprocket - number of teeth 7 Z Cylinder Chrome Oil pump Not adjustable Filter Long-term filter system (pre-separation) / cartridge filter hd2 Sprocket Profile sprocket Chain tensioning Lateral chain tension Anti vibration system Steel spring Handle type Standard grip Filler cap Tool-free filler cap Chain pitch .325" EPA Certified fuel consumption glh 0.375 EPA Certified fuel consumption l/h 1.418 Oil tank volume cm3 240
1-in-4 channel technology. The economical STIHL 2-MIX engine with 1-in-4channel technology features a high torque over a wide speed range. The chainsaw provides fuel savings of up to 20% compared to STIHL two-stroke engines in the same performance class without 2-MIX technology. Exhaust emissions are reduced by up to 50%.
The HD2 filter is made from polyethylene filter material with up to 70% finer pores than fleece and polyamide filters to trap even very fine dust. In addition, it is oil and water-repellent and thus very easy to clean. The PET-covered filter cartridge with quick-release lock enables the filter to be assembled and disassembled in next to no time, without using tools.
Side chain tensioner
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
Tool free filler caps
Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.
Pre-separation air filtration system
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
Single-lever master control
All important functions such as start, choke, throttle and stop are operated via a single lever.
As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
Ematic chain lubrication system
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.
Advanced combustion technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
Carburettor heating (V)
By changing the chain saw from summer to winter operation, the intake air is pre-heated over the engine fins. This ensures that the carburettor does not ice up and you can continue working in freezing temperatures.