Stihl FS 70 RC-E
Robust 0.9 kW petrol brushcutter with ErgoStart and loop handle
Extremely robust 0.9 kW petrol brushcutter with loop handle. 2-MIX engine consumes up to 20% less fuel and 70% less emissions compared to conventional two-stroke engines without 2-MIX technology. ErgoStart simplified starting procedure for increased comfort. Optimised trimmer angle for working on large areas of tough grass
Technical data Value CO² g/kWh 829 Displacement cm3 27.2 Performance kW 0.9 Power output hp 1.2 Weight kg 1) 4.8 Sound pressure level with plastic tool dB(A) 2) 94 Sound pressure level with metal tool dB(A) 2) 94 Sound power level dB(A) 2) 108 Sound power level with metal tool dB(A) 2) 107 Vibration value, left with plastic tool m/s2 3) 7.6 Vibration value, right with metal tool m/s2 3) 6.6 Vibration value, right with plastic tool m/s2 3) 6 Vibration value, left with metal tool m/s2 3) 6.6 Total length cm 4) 170 Cutting diameter mm 420 Tank volume l 0.34 Displacement cm³ 27.2 Power output kW/bhp 0.9/1.2 Weight kg 5) 4.8 Standard cutting tool AutoCut C 25-2
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
STIHL ErgoStart (E)
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Simplified starting system
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
Loop handle (R)
The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
For use with loop handle machines.